Entek ElektronikFPPCells & Accessories

FPP Ceramic Plate Temperature Control Unit

Entek Accessory — Four Point Probe

−5 … +80 °C, PID controlled, 4 × 4 cm ceramic sample plate — FPP 510 option

−5 … +80 °C setting range
PID control, ±0.1 °C precision
4 × 4 cm ceramic heating/cooling plate
Digital display; ▲▼ / SET / ON-OFF keys
Non-volatile target temperature

Manufacturer: Entek Elektronik, İvedik OSB, Ankara · Designed and manufactured in Türkiye

Overview

A temperature control unit integrated with the FPP 510: the 4 × 4 cm ceramic plate on which the sample rests is held between −5 and +80 °C under PID control (limits and the ±1 °C stability may vary with ambient temperature and sample mass). The target temperature is set with the ▲▼ keys, displayed with SET and the unit is switched on with ON/OFF; the actual temperature is shown on the digital display.

The last target temperature is retained even when the instrument is switched off. Allows the temperature dependence of conductivity (polymer electrolytes, ionic conductors, semiconductor films) to be measured on the same setup.

Applications

Materials characterization Teaching laboratories

Key features

−5 … +80 °C setting range
PID control, ±0.1 °C precision
4 × 4 cm ceramic heating/cooling plate
Digital display; ▲▼ / SET / ON-OFF keys
Non-volatile target temperature

Technical specifications

FPP Ceramic Plate Temperature Control Unit technical specifications
Temperature range	−5 … +80 °C (depending on ambient and sample)
Control	PID, ±0.1 °C
Plate	4 × 4 cm ceramic
Display	Digital, actual temperature
Compatibility	Entek FPP 510

Source: Entek Elektronik product documents and user manuals. Specifications are subject to change without notice.

Documentation

PDFFPP 510 user manual (Turkish)Entek Elektronik document · downloaded from the Entek server PDFFPP 510 brochure (English)Entek Elektronik document · downloaded from the Entek server

Frequently asked questions

Which applications is this instrument suitable for?

Materials characterization, Teaching laboratories. Where you cannot confirm measurement suitability, our technical team proposes a configuration based on your application.

How are installation, training and warranty provided?

Installation, software training and after-sales technical support are provided by Entek Elektronik in Türkiye. Warranty and service terms are stated in writing in the quotation.

In which language are the technical documents?

Manufacturer catalogues and brochures are in their original English; Entek datasheets are available in English and Turkish. Manufacturer documents are the authoritative source for official, current technical data.

Similar and comparable products

Entek ElektronikFPP

FPP 510 — Temperature-Controlled Four Point Probe

Four-point conductivity measurement system combining the probe, measurement electronics and −5…+80 °C temperature control in one portable unit

All-in-one: probe, controller and temperature control in one portable unit
PTFE probe head, 4 × 99.9% platinum pins; spacing 1 mm, pin diameter 0.5 mm
Vertical slide with screw-driven probe arm: from thin films to thick/large samples

Details Request a quote

Add to comparison

Entek ElektronikFPP

FPP 630T — Touch-Screen Four Point Probe

Four-point conductivity measurement for large samples with a touch-screen control panel, 10 mm pin-spacing probe and automatic or manual ranging from 2 MΩ down to 0.05 Ω

Colour touch-screen control panel: mode, sampling, range, t and K entry on one screen
PTFE probe head, 4 × 99.9% platinum pins, 10 mm spacing — for large and thick samples; replacement heads available
Measurement range 2 MΩ → 0.05 Ω: automatic ranging; manual range selection also available

Details Request a quote

Add to comparison

Is this instrument right for your research?

Our technical team evaluates the configuration and alternatives according to your measurement needs.

Technical discussion and quotation